|
Action Menu - Config - Dome - Sensor Position Panel
|
Previous Top Next |
|
Home Position
|
Home sensor position expressed in degrees
Note: we determine the the sensor’s position only once during the dome’s installation. While working with the program it should not be changed. Additional description at: Home Sensor |
|
Park Position
|
Park position expressed in degrees.
It is used to save selected dome’s azimuth using the Set Park
Position command. This can be useful when the dome before the
turning off has to be set in a specified position. The program does
not automatically set the dome on this item before its turning off.
|
|
Set Home Position
|
command saves the current dome’s position in the Home
Position field
|
|
Set Park Position
|
command saves the current dome’s position in the Park Position
field
|