|
Action Menu - Config - Dome - Sensor Position Panel
|
Previous Top Next |
|
Home
Position |
Home sensor position, in degrees
Note: we determine the sensor’s position only once during the dome’s installation. It shall not be changed while working with the program. Additional description at: Home Sensor |
|
Park
Position |
Park position, in degrees
It is used to save selected dome’s azimuth using the Set Park Position command. This can be useful when the dome has to be set in a specified position before turning off. The program does not automatically park the dome before turning off. |
|
Set Home
Position Button |
command saves current dome’s position in the
Home Position field
|
|
Set Park
Position Button |
command saves current dome’s position in the
Park Position field
|