|
Action Menu - Config - Tab - Program
|
Previous Top Next |
|
|
Program Flow Panel
|
|
· Select Io Card
|
the program can work without a driver ScopeDomeUSB
Card simulating only its action. This option is useful
during testing a program (eg. under ACP)
|
|
|
|
|
· CounterDebounceTime
|
minimum duration (expressed in milliseconds) of the
pulse at the entrance of the dome’s azimuth encoder
|
|
· Usb Card Adress
|
ScopeDome USB Card number under which it is
declared in the testing program after the List Devices
command. If you have only one card please type 0
(zero)
|
|
· Card Counter Max Value
|
the maximum value of the dome’s position counter (+ / -10 000) - if the counter reaches this value the dome will
stop and will not makeany revolutions in the direction
that increases the the counter’s value
|
|
· Main Loop Time
|
the time (in milliseconds) at which the steering card’s
state is tested and user commands are processed
|
|
|
Log File Panel |
|
· Log file name
|
name of the log file where the program’s work is saved
|
|
· Log Enable
|
turns on/off saving to the log file
|
|
· View Log File
|
the log’s file viewer
|
|
· Max Log file Size
|
maximum size of the log file
|