- Allows you to select how the program sets the telescope in the Park position
Telescope Setup Panel
- Scope Scan Interval: the time interval in which the program reads a telescope positions
- Scope Wake Up Pause: specifies the time in which telescope’s mount is starting
- Slew mode: the program will wait until the end of telescope GoTo command executing
- ScopeType: TheSky6/Ascom - if you use a telescope controlled by the ASCOM drivers - select
ASCOM; if you control the telescope through TheSky6 - select TheSky6
- Position compare: the telescope and the dome’s position reading accuracy - recommended
value is 1 degree
Set Scope Time Command: enters currect time taken from PC clock (via the Ascom driver) to a
telescope’s mount
Select Scope Command
- starts a dialogue for choosing the telescope on the ASCOM platform
